Install on your boat to unlock access to Siren features. Monitor and track multiple critical systems such as battery levels, bilge pump activity, water levels, engine performance, and more.

Required for Siren 3 Pro connectivity. This service plan offers year-round 5G LTE-M cellular coverage at the lowest cost.

Track your boat even after it leaves cellular coverage. SirenSat satisfies most insurance requirements for boats requiring real-time satellite tracking.

This plan is required to activate and use satellite tracking with the SirenSat device. This plan can also be purchased in 2 and 3 year service plans so you never have to worry about not being able to track your vessel.

Install on doors, cuddies, hatches, fridge doors, and more and receive alerts when the door or locker opened or closed.

Monitor voltage of additional batteries or battery banks that may be too far from the main unit to hardwire and receive alerts when voltage changes outside of your user- defined threshold.

Connects to your bilge pump and monitors the pump’s activity, including run time and daily cycles. Receive alerts when the pump exceeds a user defined run time or number of cycles.

Detects the presence of water in unwanted areas / at a user defined level and sends you an alert

Monitors for the presence of someone or something and then sends an alert and/or sounds an alarm. Ideally installed on a wall or bulkhead in your boat’s main entryway or corridor.

Monitors for the presence of someone or something and then sends an alert and/or sounds an alarm. Ideal for monitoring unexposed areas.

Monitor the temperature of your cabin, engine room, bait locker, or fridge and receive alerts when the temperature rises or falls below a preset threshold.

Ideal for boats that have a canvas cover. Receive alerts and/or sound an alarm when the cover is un-snapped.

Connects to the Siren 3 Pro’s output and produces a 101 decibel loud alarm and can be set to go off when doors or cuddies are open to deter theft.

Connects the Siren 3 Pro to your boat’s NMEA 2000 Network to monitor engine data, water, fuel, and waste tanks, and more.

Required to connect accessories that exceed a power draw of 1 amp. This relay can draw up to 10 amps and can be used to remotely turn off many 12v onboard devices.

Detects the presence and loss of AV shore power and sends you an alert. Relay should be hardwired directly to your AC distribution panel.

Detects the presence and loss of AV shore power and sends you an alert. Relay should be hardwired directly to your AC distribution panel.

Monitors the presence of shore power and sends you an alert if power disconnects.